Physiological Workload of Chainsaw Felling and Processing Workers – Case Study

Chainsaw felling and processing work is conducted in various natural conditions and requires significant physical effort from the workers, movement in severe weather and environmental conditions, and has a high risk of injury. The aim of this study was to determine the physiological workload of chainsaw operators through continuous heart rate measurement during the entire working day. The research was carried out during the summer of 2024, encompassing different parts of the Federation of Bosnia and Herzegovina. Heart rate was measured using a Polar H10 Heart Rate Monitor Chest Strap with continuous data logging and storage of heart rate readings. A time study was performed based on recordings conducted simultaneously with the recording of heart rate, with the aim of determining the duration of individual work operations and identifying the work operation with the highest negative impact on the worker. The average working heart rate during productive work time for subject 1 was 104 bpm, 83 bpm for subject 2, 109 bpm for subject 3, 94 bpm for subject 4 and 129 bpm for subject 5. The results of the Kruskal-Wallis test showed a statistically significant difference in average heart rate in relation to the time study element. The heart rate reserve (%HRR) for the whole study time was estimated at 41.05 % for subject 1; 22.69% for subject 2; 44.50% for subject 3; 24.04% for subject 4, and 45.78% for subject 5. The results of the study showed that the %HRR of chainsaw operators during felling and processing exceeded the value of 40% for 3 out of 5 subjects, which corresponds to hard work and may have negative consequences for operators´ health.